Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Micellar Effects on Alkaline Hydrolysis of 3,5-Dinitro-2-chloro Benzotriflouride and 2,4-Dinitrochloro Benzene in Aqueous-Acetonitrile Mixtures

Reaction rate for alkaline hydrolysis of the substrates 3,5-dinitro-2-chloro benzotriflouride (DNCBTF) (1) at 30°C and 2,4-dinitrochloro benzene (DNCB) (2) at 50°C separetely with NaOH as nucleophile is carried out spectrophotometrically in mixed aqueous-acetonitrile solvents. In each system, cationic surfactant as dodecyltrimethyl ammonium bromide (DoTAB), or anionic one as sodium dodecyle sulfate (SDS) is used in wide range of concentrations to study the effect of micelle on the reaction rate. The micellar effect is explained in term of modified pseudo phase ion exchange model. Pseudo first order rate constant, k_obs is obtained for each of the nucleophile and for both substrates 1 and 2 at all range of X_AN · k_obs at given [OH^?] and in presence of any substrate is found to increase with the increase of DoTAB,while decrease with the increase of SDS as micellar phases. Critical micelle concentrations (CMCs) in similar trend are observed to increase in DoTAB while decrease in SDS systems by increasing acetonitrile (AN) content. Micellar binding constant (K_S) between any type of given substrate and the formed micelle, is found to decrease in presence of DoTAB and increase in SDS micellar phases by increasing AN content. Finally, the ratios between pseudo first order rate constants for hydrolysis in micellar phase k_M to that in the bulk phase k_w for DoTAB and SDS systems are found to be greater than and smaller than unity respectively at any given X_AN where the data indicated for (1) is always higher than those for (2). The results concluded that micelle DoTAB is working as a catalyst for the reaction rate, while that for SDS is considered as an inhibitor.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

Ethylene Glycol as New Mobile Phase for Resolution of Two-Component Mixture of Cationic Surfactants on Alumina Surface

Aqueous ethylene glycol (ethane 1,2 diol) as a green mobile phase has been used for thin layer chromatographic (TLC) studies of cationic surfactants on alumina layers. Nineteen solvent systems were used to examine the mobility of the surfactants and to discover the best TLC system for the selective separation of dodecyl trimethylammonium bromide (DTAB) from multi-component mixture of other surfactants. Among the TLC systems studied, M₃ (ethylene glycol: water, 8:2) was best for achieving the selective separation of DTAB from multi-component mixture of other surfactants because in this mobile phase mobility of all surfactants except DTAB were insignificant. Effect of organic additives in aqueous ethylene glycol mobile phase on the mobility of surfactants was examined. The results obtained on laboratory made alumina TLC plates and commercially available precoated alumina HPTLC plates were compared. The lower limits of detection of DTAB, CPC, CTAB, HDTAC, and TTAB were 0.02, 0.05, 0.04, 0.06, or 0.08 µg per zone respectively. The resolution of mixture of cationic surfactants was also examined in the presence metal cations as an impurity in the analyzed sample.     

Preparation of Ag Nanoparticles in Surfactant Solution

The physicochemical properties of Ag nanoparticles have been determined by the nature of the used chemical reductors. The reported procedures describe the reduction of silver ions using N‐Phenylbenzohydroxamic acid (PBHA) and ascorbic acid individually. The influencing factors including cationic, anionic, zwitterionic and nonionic surfactants and pH have also been investigated in detail.     

Interphase Transport in an Emulsion: Tartaric Acid

The individual compounds in an emulsion of tartaric acid stabilized by a commercial surfactant, Laureth 4, were brought into contact in order to estimate the deviation from equilibrium conditions during emulsion evaporation. The transfer of compounds between the phases was followed by visual observation of new phases appearing and the movement of the interfaces with time. The results revealed that, conversely to the equilibrium processes in the corresponding salicylate emulsions, in the present system the dissolution of the acid was faster than the formation of birefringent structures and the variation of different colloidal structures could be followed in the experiment. A suitable choice of initial ratio between the three compounds enabled the transfer of compounds to result in an early depletion of the solid acid and subsequently information could be obtained about the relation between the transport of surfactant and water-acid solution into the birefringent layer. A significant dependence was found between the composition of the entrants into the layer and the amount of surfactant liquid remaining.     

Extraction Separation of BSA in Aqueous Two-Phase Systems of Anionic and Cationic Surfactant Mixtures

Aqueous two-phase systems (ATPS) are formed in mixtures of sodium dodecylsulfate (SDS), cetyltrimethyl ammonium bromide (CTAB), and sodium bromide (NaBr). Two different kinds of ATPS appear when CTAB and SDS surfactants are in excess, respectively. Such ATPS may provide a new, useful partitioning system for separation of bovine serum albumin (BSA). The partitioning of BSA was studied in these systems. The results show that the partitioning is affected by the electrical property, the hydrophobicity and the structure of liquid crystal (LC), which exists in the top phase of the ATPS. BSA is extracted into the top phase with higher distribution coefficient when LC and BSA are oppositely charged. The hydrophobicity of LC, which can be improved by increasing the length of alkyl group, enhances the distribution coefficient. The hydrophobicity of lamellar LC and hexagonal LC is stronger than that of cubic LC, which causes extractive capability of the former is higher than the latter.     

A Method for Determination of Low Levels of Exposure to 2,4-D and 2,4,5-T

A method has been developed for the determination of trace quantities of 2,4-dichloro-phenoxyacetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T), 2,4-dichlorophenol (2,4-DCP), and 2,4,5-trichlorophenol (2,4,5-TCP) in human and rat urine. The method involves acid hydrolysis of the phenolic conjugates, extraction of the free phenols and acids, ethylation with diazoethane, silica-gel column chromatography clean-up of the derivatized urine extract, and gas chromatographic determination using the electron-capture detector. The average recoveries of 2,4-D, 2,4,5-T, 2,4-DCP, and 2,4,5-TCP from rat urine spiked with known amounts of the herbicides and their phenols were 94%, 98%, 92%, and 90%, respectively. The limits of detection for 2,4-D, 2,4,5-T, DCP, and TCP in rat urine were: 0.05, 0.01, 0.10, and 0.01 ppm, respectively. The method was used to analyze urine of rats given various levels of 2,4-D and 2,4,5-T by gavage. Results showed that levels of exposure of 3.75 mcg/kg for 2,4-D and 5.0 mcg/kg for 2,4,5-T in rats can be detected in urine within 24 hr from exposure. Urine samples from occupationally exposed people were analyzed and found to contain 0.2 to 1.0 ppm 2,4-D and 0.05 to 3.6 ppm 2,4,5-T.